sun_yang 发表于 2011-1-21 12:08

【求助】rg100a 带 ET127

参照antclan的帖子http://www.ibmnb.com/viewthread.php?tid=948344
前面刷机 开full界面 共享上网 安装软件包全都没问题
从配置网卡开始有点头大了我的网卡 ET127
以下是我的操作步骤 希望有XD帮忙指点一下 不胜感激

编辑/etc/modules.d/60-usb-serial 为
====================================================================================================
usbserial vendor=0x12d1 product=0x1d09 # Huawei ET127
====================================================================================================



新建/etc/usb-modeswitch.conf 为
====================================================================================================
# Huawei ET127
#
# Contributor: Dale Lane
DefaultVendor=0x12d1;
DefaultProduct= 0x1d09
# choose one of these:
DetachStorageOnly=0
MessageContent=5553424312345678000000000000061b000000020000000000000000000000
====================================================================================================


执行usb_modeswitch -W

提示框
====================================================================================================
命令 'pwd'
失败并返回0，错误消息
15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001。
====================================================================================================

终端
====================================================================================================
/etc$ usb_modeswitch -W
Reading config file: /etc/usb-modeswitch.conf

* usb-modeswitch: handle USB devices with multiple modes
* Version 1.1.0 (C) Josua Dietze 2010
* Based on libusb 0.1.12

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor=0x12d1
DefaultProduct= 0x1d09
TargetVendor=   not set
TargetProduct=not set
TargetClass=    not set

DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
MessageEndpoint= not set
MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00

InquireDevice enabled (default)
Success check disabled
System integration mode disabled


Looking for default devices ...
searching devices, found USB ID 1d6b:0001
No default device found. Is it connected? Bye.
====================================================================================================

执行 dmesg | grep usb

====================================================================================================
/etc$ dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver cdc_acm
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
====================================================================================================

后面无法继续
可能是vendor和product不对但也不知道怎么找 看有帖子说就是这个值

[ Edited bysun_yang on 2011-1-21 12:09 ]

zhangted 发表于 2011-1-21 12:10

不懂装顶,预祝LZ成功:D

西安 发表于 2011-1-21 16:06

把我的128发上来你试试

xiefh 发表于 2011-1-21 16:09

HuaweiMode=1 试试
可以参考128的配置

lxq8432 发表于 2011-8-22 19:21

网卡应该是/dev/ttyACM0，我的ET188今天终于能上网了

===========试过的一个配置文件   ================

# ET128

DefaultVendor= 0x12d1
DefaultProduct=0x1da1

TargetClass=0xff

DefaultVendor= 0x12d1
TargetProduct= 0x1d09
HuaweiMode=1

CheckSuccess=20



==========================================

zz243 发表于 2011-8-22 22:08

马克一下
页: [1]
查看完整版本: 【求助】rg100a 带 ET127