baohui737 发表于 2011-6-6 11:26

AC901 作为3G路由求助 RG100A

看了论坛大大们的帖子，自己也开始玩RG100A，手上有AC901.终于能让落于认出AC901了，但是就是不能拨号

/root$ gcom -s /etc/gcom/getstrength.gcom -d /dev/ttyUSB0
Can't open device /dev/ttyUSB0.


检测USB正常
/root$ dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rtl8187
usbcore: registered new interface driver p54usb
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver cdc_acm
usbcore: registered new interface driver usblp
usb 2-1: new full speed USB device using bcm63xx_ohci and address 2
usbcore: registered new interface driver usbserial
usb 2-1: device descriptor read/64, error -62
usb 2-1: configuration #1 chosen from 1 choice
usbserial_generic 2-1:1.0: generic converter detected
usb 2-1: generic converter now attached to ttyUSB0
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver zd1211rw
usbserial_generic 2-1:1.0: device disconnected
usb 2-1: usbfs: process 804 (usb_modeswitch) did not claim interface 0 before use
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using bcm63xx_ohci and address 3
usb 2-1: device descriptor read/64, error -62
usb 2-1: configuration #1 chosen from 1 choice
usbserial_generic 2-1:1.0: generic converter detected
usb 2-1: generic converter now attached to ttyUSB0
usbserial_generic 2-1:1.0: device disconnected
usb 2-1: usbfs: process 1403 (usb_modeswitch) did not claim interface 0 before use


运行/root$ pppd /dev/ttyUSB0 115200 connect "chat -s -v -f /etc/chatscripts/3g.chat"

出现Jun6 11:12:34 OpenWrt authpriv.notice dropbear: password auth succeeded for 'root' from 192.168.0.1:4395
Jun6 11:13:02 OpenWrt daemon.notice pppd: pppd 2.4.4 started by root, uid 0
Jun6 11:13:02 OpenWrt daemon.err pppd: Failed to open /dev/ttyUSB0: No such device
Jun6 11:13:02 OpenWrt daemon.info pppd: Exit.


或者有时候能拨号，在
ABORT   BUSY
ABORT   'NO CARRIER'
ABORT   ERROR
REPORTCONNECT
TIMEOUT 10
走到这里出错

请各位大侠给予帮助，谢谢

孔布份紫 发表于 2011-6-7 00:05

帮你顶起。

xsephiroth 发表于 2011-6-7 08:47

不懂的路过，我的901是手动ifup去拨号的

tulaomao 发表于 2011-6-8 09:40

各位都是高手我已无能为力了准备入手其他设备

baohui737 发表于 2011-6-8 10:15

折腾也是一种乐趣

zz243 发表于 2011-6-8 23:17

ac901需要改一下配置文件

tulaomao 发表于 2011-6-9 19:43

Posted by zz243 on 2011-6-8 23:17 http://www.thinkpad.cn/forum/images/common/back.gif
ac901需要改一下配置文件
要改什么文件 ？

西安 发表于 2011-8-19 09:12

学antclan的教程

已经搞定全自动了 901 配置文件

DefaultVendor=0x1ab7

DefaultProduct=0x0301


DefaultVendor=0x1ab7
DefaultProduct=0x0301
MessageContent="5553424312345678000000000000061b000000030000000000000000000000"

[ Edited by西安 on 2011-8-19 09:17 ]

msvcp60 发表于 2011-8-19 09:41

恭喜，AC901本人在 腾达路由器上用过，效果还是刚刚的:D
页: [1]
查看完整版本: AC901 作为3G路由求助 RG100A