【求助】 rg100a 刷openwrt ，挂华为E1750无法拨号
已经按照《H618b、rg100a刷OpenWrt固件及使用3G上网卡+宽带合并》该教程挂载了E1750openwrt 版本OpenWrt Backfire 10.03.233 DIY mini
root@OpenWrt:~# dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rtl8187
usbcore: registered new interface driver p54usb
usb usb1: configuration #1 chosen from 1 choice
usb 1-1: new high speed USB device using bcm63xx_ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
usbserial_generic 1-1:1.0: generic converter detected
usb 1-1: generic converter now attached to ttyUSB0
usbserial_generic 1-1:1.1: generic converter detected
usb 1-1: generic converter now attached to ttyUSB1
usbserial_generic 1-1:1.2: generic converter detected
usb 1-1: generic converter now attached to ttyUSB2
usbcore: registered new interface driver usbserial_generic
Modules linked in: usbserial(+) usblp uhci_hcd ohci_hcd macvlan xt_IMQ imq nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_HL xt_hl xt_MARK ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn xt_DSCP xt_dscp xt_string xt_layer7 ipt_MASQUERADE iptable_nat nf_nat xt_CONNMARK xt_recent xt_helper xt_conntrack xt_connmark xt_connbytes xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables msdos ext2 p54usb ext3 jbd tun ppp_async ppp_generic slhc p54common vfat fat ntfs b43 rtl8187 nls_utf8 nls_iso8859_1 nls_cp437 mac80211 usbcore ts_fsm ts_bm ts_kmp switch_adm switch_robo switch_core scsi_mod nls_base eeprom_93cx6 crc_ccitt cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver zd1211rw
拨号后查看系统日值发现
Jun 13 09:55:19 OpenWrt authpriv.notice dropbear: password auth succeeded for 'root' from 192.168.1.8:4157
Jun 13 09:55:54 OpenWrt daemon.notice pppd: pppd 2.4.4 started by root, uid 0
Jun 13 09:55:55 OpenWrt local2.info chat: abort on (BUSY)
Jun 13 09:55:55 OpenWrt local2.info chat: abort on (NO CARRIER)
Jun 13 09:55:55 OpenWrt local2.info chat: abort on (ERROR)
Jun 13 09:55:55 OpenWrt local2.info chat: report (CONNECT)
Jun 13 09:55:55 OpenWrt local2.info chat: timeout set to 10 seconds
Jun 13 09:55:55 OpenWrt local2.info chat: send (AT&F^M)
Jun 13 09:55:55 OpenWrt local2.info chat: expect (OK)
Jun 13 09:56:05 OpenWrt local2.info chat: alarm
Jun 13 09:56:05 OpenWrt local2.info chat: Failed
Jun 13 09:56:05 OpenWrt daemon.err pppd: Connect script failed
Jun 13 09:56:21 OpenWrt daemon.info transmission-daemon: Port Forwarding State changed from "Starting" to "???" (port-forwarding.c:87)
Jun 13 09:56:37 OpenWrt local2.info chat: abort on (BUSY)
Jun 13 09:56:37 OpenWrt local2.info chat: abort on (NO CARRIER)
Jun 13 09:56:37 OpenWrt local2.info chat: abort on (ERROR)
Jun 13 09:56:37 OpenWrt local2.info chat: report (CONNECT)
Jun 13 09:56:37 OpenWrt local2.info chat: timeout set to 10 seconds
Jun 13 09:56:37 OpenWrt local2.info chat: send (AT&F^M)
Jun 13 09:56:37 OpenWrt local2.info chat: expect (OK)
Jun 13 09:56:47 OpenWrt local2.info chat: alarm
Jun 13 09:56:47 OpenWrt local2.info chat: Failed
Jun 13 09:56:47 OpenWrt daemon.err pppd: Connect script failed
请教各位高手，为什么无法正常拨号 3g配置截图 modem设备：/dev/ttyUSB0 Posted by antclan on 2011-6-13 11:35 http://www.ibmnb.com/images/common/back.gif
modem设备：/dev/ttyUSB0
默认就是，加上也不管用 1,APN里填CMNET
2,modem设备：/dev/ttyUSB0 ，再试试
回复 #5 孔布份紫 的帖子
大哥，我的是wcdma的卡，联通的啊
页:
[1]