gulch 发表于 2008-12-23 13:31

【转帖】保存资料,wrt54g和wrt54gs的详细资料,有详细图片和主板图片

  
   http://www.linksysinfo.org/forums/showthread.php?t=47124


部分精华资料

      WRT54G V3.1

  Gross External Anatomy

  The Version 3.1 looks exactly the same as the v3.0 on the outside. Use the label on the bottom to identify version.

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GV4.jpg

  

  Internal Anatomy

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GV31-mbsm.jpg

  Serial Numbers begin with CDF9

  WRT54GS v1.0

  Gross Anatomy

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GS.jpg

  Once again the router is virtually indistinguishable from the outside save for a sticker indicating the addition of SpeedBooster and the different model name WRT54GS versus . The spartan LED setup remains the same – besides, who wants additional info on the connection speed or collisions?

  http://www.linksysinfo.org/images/Content/Autopsy/8LED.png

  

  Internal Anatomy

  Let the conspiracy theories begin to fly - the only distinguishable differences from the non-SpeedBooster WRT54Gv2.0 is the doubling of both RAM and Flash. The System RAM gets bumped from 16 to 32 MB and the Flash memory from 4MB to 8MB. Additionally, there are two different solder pads for the Flash chip, the GS occupies the more forward and the GV2 the rearward. This may just be due to the flash size. The sites for the serial and EJTAG ports also remain in the GS motherboard. If anyone is willing to take the RF cover off their router, perhaps we can get a better look at the Radio on each of these versions.

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GS-mbsm.jpg

  Obviously those people using ‘hacked’ firmware that allows for add-ons will appreciate the extra memory space. The CPU remains the same 200MHz as in the v2.0 hardware.

  

  WRT54GS v1.1

  Gross Anatomy

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GS.jpg

  The only difference between the WRT54GS v1.0 and v1.1 should be found in the label. If you are looking for one in the store, the Serial Numbers for the v1.1 start with CGN2xxx where the v1.0 started with CGN1xxx

  http://www.linksysinfo.org/images/Content/Autopsy/8LED.png

  

  Internal Anatomy

  Like with theupgrade to v2.2, the v1.1 WRT54GS hardware revision gets a change to the Broadcom BCM5325E ethernet controller as well.

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GSV11-mbsm.jpg

  Thanks to Olek Kwasniewski for the great photo!

  WRT54GS v2.0

  Serial Numbers begin with CGN3

  

  WRT54GS v2.1

  Gross External Anatomy Use the label on the bottom to identify version.

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GSV21.jpg

  

  Internal Anatomy

  http://www.linksysinfo.org/images/Content/Autopsy/WRT54GSV21-mbsm.jpg

  Serial Numbers begin with CGN4

zhouyuhen 发表于 2008-12-23 18:08

这个是?

火星总督 发表于 2008-12-23 19:56

54g的v5的的确确缩水,谢谢楼主

火星总督 发表于 2008-12-23 19:59

回复 #3 火星总督 的帖子

看主板照片

gulch 发表于 2009-3-4 00:49

使用64m教程^u^

我的WRT54G V3.1也上64M了
http://www.wlanbbs.com/thread-11006-1-1.html

各种无线路由器加内存后的参数设置
http://www.right.com.cn/forum/viewthread.php?tid=20690

成功升级WRT54G v4到64MB RAM,并通过telnet 刷CFE固定(无JTAG)
http://www.right.com.cn/forum/viewthread.php?tid=16153

[ Edited bygulch on 2009-3-13 12:27 ]

HINO 发表于 2009-3-15 14:06

回复 #5 gulch 的帖子

http://www.wlanbbs.com/thread-11006-1-1.html

http://www.right.com.cn/forum/viewthread.php?tid=22031

http://www.right.com.cn/forum/viewthread.php?tid=21977
========================================================

这几个是我升级的帖子,呵呵,

我的WR850G V2也是一样升级到了64M的了,

不过我的V3.1已经出个51NB兄弟的了,850 V2也出了,

其实升级64M不脱机下载的话没必要的

现在买了WZR 300N了,跟WRT54G V3.1比的话:速度快很多,

信号要好7-10DBI,改天来收个WRT 350N玩玩,:D :D
================================================================

[ Edited byHINO on 2009-3-15 14:10 ]
页: [1]
查看完整版本: 【转帖】保存资料,wrt54g和wrt54gs的详细资料,有详细图片和主板图片