dennisgz 发表于 2009-3-1 23:29

冒死把LINKSYS WAP54G V3刷DD WRT

2年前在太平洋买了个LINKSYS WAP54G的AP,败了我700元,前几天经常当掉,估计固件不好导致吧,之前也是有该现象但不严重。
好了,想搞DD WRT,网上到处都是刷成砖头的例子,经查一大堆资料和思想、心理准备后,头汗手汗一起来,看着这个
WARNING - Use V24-final micro build on the WAP v3.X units.

For loading the firmware on the WAP54G v3.X Use V24-RC5 or later for Reset button function

    * Connect PC to LAN port on WAP
    * Configure PC ethernet port to IP: 192.168.1.2, SM: 255.255.255.0, GW: 192.168.1.245
    * Unplug power. Wait 15 seconds
    * Press and hold Reset Button on WAP unit for 30 seconds, unplug unit, Plug back in still holding reset button an

additional 30 seconds.

    * Open your favorite browser (I used Firefox) and go to: http://192.168.1.245
    * Login as:

User: <blank>

Password: admin

Hit the Administration tab, and upload the MICRO version of the firmware.

    * Wait 5 minutes after it says it completes successfully.
    * Press and hold Reset Button on WAP unit for 30 seconds, unplug unit, Plug back in still holding reset button an

additional 30 seconds.

    * Go to: http://192.168.1.1 in your browser and login with the default un/pw for DD-WRT...
的步骤,一步步来。
好了当做到网页上传固件时.......错误!........心跳加速!
拔电前一部分页面打不开,知道出事了..............唉,看来真的完了。
拔电............重插............已经打不开了,Wireless灯不亮了,玩完..............

之后试下PING 192.168.1.245,通喔又。
再用tftp试着传一次固件,好快,重启,啊叻,Wireless灯亮了,奇迹?输入192.168.1.1,得了,进去了!长舒一口气,汗终于干了,啊~~~~~~~~~~~成功了,虚惊虚惊....................

总觉得指南那里有点误导人家......

jamesl181 发表于 2009-3-2 15:19

这很轻松啊,是随便刷了好多次了。

irenezi 发表于 2009-3-2 15:32

我的也是这个,但是还没有刷过呢:')

hhh471080 发表于 2009-3-2 15:40

联通EDGE WCDMAQQ群77516239

dennisgz 发表于 2009-3-3 00:17

现在调到5mW都够两家人用了,呵呵

gerrytsang 发表于 2009-3-3 09:27

记得LINKSYS行货是保三年的,放心刷吧,几年前买的WRT54G V4,刷过DD,OPENWRT,WAYOS,TOMATO等,中间刷坏过也拿回去换.不然对不起买行货的价钱.
页: [1]
查看完整版本: 冒死把LINKSYS WAP54G V3刷DD WRT