【原创】H618b、rg100a刷OpenWrt固件及使用3G上网卡+宽带合并[2011/4/21更新] - 第11页 - 网络技术 - 专门网

hzwang01 发表于 2011-6-30 17:03

现在终于拔上了，出现了DNS了就可以上网了，网络接口那边也出现了IP和PPP0了，
就是还想把猫的模式切换回去，让modeswitch切换成猫。
搞这个头都整大了，前几个月就弄了一下，就没弄，现在又想整了，嘿嘿，不过还是弄的可以拔了，谢谢LZ

hzwang01 发表于 2011-7-1 23:35

为何拔号成功了，就是DNS不出现啊，没有DNS就不能上网了
Jul1 23:30:20 OpenWrt user.info kernel: usb 2-1: configuration #1 chosen from 1 choice
Jul1 23:30:20 OpenWrt user.info kernel: usbserial_generic 2-1:1.0: generic converter detected
Jul1 23:30:20 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB0
Jul1 23:30:20 OpenWrt user.info kernel: usbserial_generic 2-1:1.1: generic converter detected
Jul1 23:30:20 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB1
Jul1 23:30:20 OpenWrt user.info kernel: usbserial_generic 2-1:1.2: generic converter detected
Jul1 23:30:20 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB2
Jul1 23:30:20 OpenWrt user.info kernel: usbserial_generic 2-1:1.3: generic converter detected
Jul1 23:30:20 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB3
Jul1 23:30:36 OpenWrt daemon.notice pppd: pppd 2.4.4 started by root, uid 0
Jul1 23:30:37 OpenWrt local2.info chat: abort on (BUSY)
Jul1 23:30:37 OpenWrt local2.info chat: abort on (NO CARRIER)
Jul1 23:30:37 OpenWrt local2.info chat: abort on (ERROR)
Jul1 23:30:37 OpenWrt local2.info chat: report (CONNECT)
Jul1 23:30:37 OpenWrt local2.info chat: timeout set to 10 seconds
Jul1 23:30:37 OpenWrt local2.info chat: send (ATZ^M)
Jul1 23:30:37 OpenWrt local2.info chat: expect (OK)
Jul1 23:30:37 OpenWrt local2.info chat: ^M
Jul1 23:30:37 OpenWrt local2.info chat: OK
Jul1 23:30:37 OpenWrt local2.info chat:-- got it
Jul1 23:30:37 OpenWrt local2.info chat: send (ATE0V1^M)
Jul1 23:30:37 OpenWrt local2.info chat: expect (OK)
Jul1 23:30:37 OpenWrt local2.info chat: ^M
Jul1 23:30:37 OpenWrt local2.info chat: ^M
Jul1 23:30:37 OpenWrt local2.info chat: OK
Jul1 23:30:37 OpenWrt local2.info chat:-- got it
Jul1 23:30:37 OpenWrt local2.info chat: send (ATS0=0^M)
Jul1 23:30:37 OpenWrt local2.info chat: expect (OK)
Jul1 23:30:37 OpenWrt local2.info chat: ^M
Jul1 23:30:37 OpenWrt local2.info chat: ^M
Jul1 23:30:37 OpenWrt local2.info chat: OK
Jul1 23:30:37 OpenWrt local2.info chat:-- got it
Jul1 23:30:37 OpenWrt local2.info chat: send (AT+CGDCONT=1,"IP","$USE_APN"^M)
Jul1 23:30:38 OpenWrt local2.info chat: expect (OK)
Jul1 23:30:38 OpenWrt local2.info chat: ^M
Jul1 23:30:38 OpenWrt local2.info chat: ^M
Jul1 23:30:38 OpenWrt local2.info chat: OK
Jul1 23:30:38 OpenWrt local2.info chat:-- got it
Jul1 23:30:38 OpenWrt local2.info chat: send (AT+CFUN=1^M)
Jul1 23:30:38 OpenWrt local2.info chat: timeout set to 30 seconds
Jul1 23:30:38 OpenWrt local2.info chat: expect (OK)
Jul1 23:30:38 OpenWrt local2.info chat: ^M
Jul1 23:30:41 OpenWrt local2.info chat: ^M
Jul1 23:30:41 OpenWrt local2.info chat: OK
Jul1 23:30:41 OpenWrt local2.info chat:-- got it
Jul1 23:30:41 OpenWrt local2.info chat: send (ATD*98*1#^M)
Jul1 23:30:41 OpenWrt local2.info chat: expect (CONNECT)
Jul1 23:30:41 OpenWrt local2.info chat: ^M
Jul1 23:30:41 OpenWrt local2.info chat: ^M
Jul1 23:30:41 OpenWrt local2.info chat: CONNECT
Jul1 23:30:41 OpenWrt local2.info chat:-- got it
Jul1 23:30:41 OpenWrt local2.info chat: send ( ^M)
Jul1 23:30:41 OpenWrt daemon.info pppd: Serial connection established.
Jul1 23:30:41 OpenWrt daemon.info pppd: Using interface ppp0
Jul1 23:30:41 OpenWrt daemon.notice pppd: Connect: ppp0 <--> /dev/ttyUSB0
Jul1 23:30:48 OpenWrt daemon.notice pppd: localIP address 10.182.1.3
Jul1 23:30:48 OpenWrt daemon.notice pppd: remote IP address 192.168.0.1
就到这里了，就是没见到DNS，怎么回事哦？

hzwang01 发表于 2011-7-12 23:38

现在基本稳定了，拔号也不会断线了，就是差一个不能自动拔号了，网卡接上去，不能自动拔，LZ有何解决方法，请赐教！
我的配置是这样的：DSL-2650BU+MU351，系统是：rg100a-openwrt.org.cn-10.03.396-DIY-mini-0218.bin，我在10-USB里加了usb_modeswitch -W，接上网卡可以自动切换成猫了，但不能加上IFUP TD，加上这个能自动拔号，但一两分钟就掉线，日志还是看到刚才拔号成功的样子，但不能上网，我的10-USB内容是：
#!/bin/sh

# Copyright (C) 2009 OpenWrt.org

case "$ACTION" in
add)
# update LEDs
sleep 2
usb_modeswitch -W
;;
remove)
# update LEDs
;;
esac

这样不会掉线的，就是不能自动拔号。
我现在也做个总结吧，希望新手也不要绕太多的弯了。
刷机就不多说了，两个版本：rg100a-openwrt.org.cn-10.03.396-DIY-mini-0218.bin和rg100a-openwrt.org.cn-10.03.336-DIY-mini-0916.bin都可以，刷好后USB基本都装好了，就只有拔号的了，安装chat comgt usb-modeswitch这3个包，其中usb-modeswitch这个包是把网卡转成猫用的，并且我在2650里面这个包不能用trunk版的usb-modeswitch，usb-modeswitch-DATA可以用trunk版的。
最后要用的几个文件内容贴上：
/etc/modules.d/60-usb-serial
usbserial vendor=0x19d2 product=0x0003 # ZTE MU351
=============分割线=====================
/etc/usb-modeswitch.conf
########################################################
# ZTE MU351

DefaultVendor= 0x19d2
DefaultProduct= 0x0003

TargetClass=0xff
DetachStorageOnly=0

MessageContent=5553424312345679000000000000061b000000020000000000000000000000
MessageContent2=5553424312345678000000000000061e000000000000000000000000000000
================分割线=======================================
/etc/chatscripts/3g.chat
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
REPORTCONNECT
TIMEOUT 10
""    "ATZ"
OK    "ATE0V1"
OK    "ATS0=0"
OK    'AT+CGDCONT=1,"IP","$USE_APN"'
OK    "AT+CFUN=1"
SAY "Calling TD-SCDMA"
TIMEOUT 30
OK    "ATD*98*1#"
CONNECT ' '

这版本我不做网卡配置，刷好就是一个WAN三个LAN，要配置的话在WEB里可以配的，如果USB猫已经转成猫的模式就不用usb-modeswitch这个包了。

hzwang01 发表于 2011-7-12 23:52

LZ，有个问题请教一下，我刷的是rg100a-openwrt.org.cn-10.03.396-DIY-mini-0218.bin，配置是DSL-2650BU+MU351，出现不能自动拔号的问题，安装新版的chat comgt两个包也不能自动拔号，要先手动拔一次才能自动拔的，我就在10-USB里加了内容是usb_modeswitch -W和IFUP TD这两条命令，网卡接上去就去自动识别、转换、拔号，但拔号成功后一两分钟就掉线了，就去掉IFUP TD这条命令了，就正常了，但就是要手动拔号，其它都没问题，LZ有何办法请赐教，谢谢。这版本就是N-WAN不好使，双网时要手动点一下才能使用。

hzwang01 发表于 2011-7-12 23:52

hzwang01 发表于 2011-7-12 23:54

hzwang01 发表于 2011-7-12 23:55

hzwang01 发表于 2011-7-12 23:57

hzwang01 发表于 2011-7-13 00:00

LZ，有个问题请教一下，我刷的是rg100a-openwrt.org.cn-10.03.396-DIY-mini-0218.bin，配置是DSL-2650BU+MU351，出现不能自动拔号的问题，安装新版的chat comgt两个包也不能自动拔号，要先手动拔一次才能自动拔的，我就在10-USB里加了内容是usb_modeswitch -W和IFUP TD这两条命令，网卡接上去就去自动识别、转换、拔号，但拔号成功后一两分钟就掉线了，只要多执行一次也会像上面一样掉线的。就去掉IFUP TD这条命令了，就正常了，但就是要手动拔号，其它都没问题，LZ有何办法请赐教，谢谢。这版本就是N-WAN不好使，双网时要手动点一下才能使用。

hzwang01 发表于 2011-7-13 00:01

怎么一下发这么多啊，请管理员删几个吧

hzwang01 发表于 2011-7-13 00:03

Jul 12 22:25:42 OpenWrt user.err kernel: hub 1-0:1.0: over-current change on port 1
Jul 12 22:25:45 OpenWrt user.info kernel: usb 2-1: new full speed USB device using bcm63xx_ohci and address 6
Jul 12 22:25:45 OpenWrt user.info kernel: usb 2-1: configuration #1 chosen from 1 choice
Jul 12 22:25:45 OpenWrt user.info kernel: usbserial_generic 2-1:1.0: generic converter detected
Jul 12 22:25:45 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB0
Jul 12 22:25:47 OpenWrt user.info kernel: generic ttyUSB0: generic converter now disconnected from ttyUSB0
Jul 12 22:25:47 OpenWrt user.info kernel: usbserial_generic 2-1:1.0: device disconnected
Jul 12 22:25:47 OpenWrt user.warn kernel: usb 2-1: usbfs: process 5824 (usb_modeswitch) did not claim interface 0 before use
Jul 12 22:25:47 OpenWrt user.info kernel: usb 2-1: USB disconnect, address 6
Jul 12 22:25:47 OpenWrt user.notice root: stopping ntpclient
Jul 12 22:25:48 OpenWrt user.info kernel: usb 2-1: new full speed USB device using bcm63xx_ohci and address 7
Jul 12 22:25:48 OpenWrt user.info kernel: usb 2-1: configuration #1 chosen from 1 choice
Jul 12 22:25:48 OpenWrt user.info kernel: usbserial_generic 2-1:1.0: generic converter detected
Jul 12 22:25:48 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB0
Jul 12 22:25:48 OpenWrt user.info kernel: usbserial_generic 2-1:1.1: generic converter detected
Jul 12 22:25:48 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB1
Jul 12 22:25:48 OpenWrt user.info kernel: usbserial_generic 2-1:1.2: generic converter detected
Jul 12 22:25:48 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB2
Jul 12 22:25:48 OpenWrt user.info kernel: usbserial_generic 2-1:1.3: generic converter detected
Jul 12 22:25:48 OpenWrt user.info kernel: usb 2-1: generic converter now attached to ttyUSB3
这个是网卡转换成功的样子

hzwang01 发表于 2011-7-13 00:04

Jul 12 22:26:12 OpenWrt local2.info chat: abort on (BUSY)
Jul 12 22:26:12 OpenWrt local2.info chat: abort on (NO CARRIER)
Jul 12 22:26:12 OpenWrt local2.info chat: abort on (ERROR)
Jul 12 22:26:12 OpenWrt local2.info chat: report (CONNECT)
Jul 12 22:26:12 OpenWrt local2.info chat: timeout set to 10 seconds
Jul 12 22:26:12 OpenWrt local2.info chat: send (ATZ^M)
Jul 12 22:26:12 OpenWrt local2.info chat: expect (OK)
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: OK
Jul 12 22:26:12 OpenWrt local2.info chat:-- got it
Jul 12 22:26:12 OpenWrt local2.info chat: send (ATE0V1^M)
Jul 12 22:26:12 OpenWrt local2.info chat: expect (OK)
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: OK
Jul 12 22:26:12 OpenWrt local2.info chat:-- got it
Jul 12 22:26:12 OpenWrt local2.info chat: send (ATS0=0^M)
Jul 12 22:26:12 OpenWrt local2.info chat: expect (OK)
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: OK
Jul 12 22:26:12 OpenWrt local2.info chat:-- got it
Jul 12 22:26:12 OpenWrt local2.info chat: send (AT+CGDCONT=1,"IP","CMNET"^M)
Jul 12 22:26:12 OpenWrt local2.info chat: expect (OK)
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:12 OpenWrt local2.info chat: OK
Jul 12 22:26:12 OpenWrt local2.info chat:-- got it
Jul 12 22:26:12 OpenWrt local2.info chat: send (AT+CFUN=1^M)
Jul 12 22:26:12 OpenWrt local2.info chat: timeout set to 30 seconds
Jul 12 22:26:12 OpenWrt local2.info chat: expect (OK)
Jul 12 22:26:12 OpenWrt local2.info chat: ^M
Jul 12 22:26:15 OpenWrt local2.info chat: ^M
Jul 12 22:26:15 OpenWrt local2.info chat: OK
Jul 12 22:26:15 OpenWrt local2.info chat:-- got it
Jul 12 22:26:15 OpenWrt local2.info chat: send (ATD*98*1#^M)
Jul 12 22:26:16 OpenWrt local2.info chat: expect (CONNECT)
Jul 12 22:26:16 OpenWrt local2.info chat: ^M
Jul 12 22:26:16 OpenWrt local2.info chat: ^M
Jul 12 22:26:16 OpenWrt local2.info chat: CONNECT
Jul 12 22:26:16 OpenWrt local2.info chat:-- got it
Jul 12 22:26:16 OpenWrt local2.info chat: send ( ^M)
Jul 12 22:26:16 OpenWrt daemon.info pppd: Serial connection established.
Jul 12 22:26:16 OpenWrt daemon.info pppd: Renamed ppp0 to 3g-TD
Jul 12 22:26:16 OpenWrt daemon.info pppd: Using interface 3g-TD
Jul 12 22:26:16 OpenWrt daemon.notice pppd: Connect: 3g-TD <--> /dev/ttyUSB0
Jul 12 22:26:23 OpenWrt daemon.notice pppd: replacing old default route to eth1.1
Jul 12 22:26:23 OpenWrt daemon.notice pppd: localIP address 10.80.133.219
Jul 12 22:26:23 OpenWrt daemon.notice pppd: remote IP address 192.168.0.1
Jul 12 22:26:23 OpenWrt daemon.notice pppd: primary DNS address 218.201.21.132
Jul 12 22:26:23 OpenWrt daemon.notice pppd: secondary DNS address 218.201.4.3
Jul 12 22:26:25 OpenWrt daemon.info dnsmasq: reading /tmp/resolv.conf.auto
Jul 12 22:26:25 OpenWrt daemon.info dnsmasq: using nameserver 218.201.4.3#53
Jul 12 22:26:25 OpenWrt daemon.info dnsmasq: using nameserver 218.201.21.132#53
Jul 12 22:26:25 OpenWrt daemon.info dnsmasq: using local addresses only for domain lan
Jul 12 22:26:36 OpenWrt user.notice root: starting ntpclient
Jul 12 22:26:36 OpenWrt user.notice rdate: No usable time server found
这个是拔号成功的样子

hzwang01 发表于 2011-7-13 00:07

这个是在终端上断开3G执行了IFDOWN TD命令再执行拔号IFUP TD命令出现的错误，必须要拔一次网卡才能正常拔号。
root@OpenWrt:/# ifdown TD
/sbin/ifdown: eval: line 1: scan_ppp: not found
root@OpenWrt:/# ifup TD
/sbin/ifdown: eval: line 1: scan_ppp: not found
/sbin/ifup: eval: line 1: scan_ppp: not found
comgt 00:05:43 -> -- Error Report --
comgt 00:05:43 -> ----> ^
comgt 00:05:43 -> Error @114, line 9, Could not write to COM device. (1)

comgt 00:05:44 -> -- Error Report --
comgt 00:05:44 -> ----> ^
comgt 00:05:44 -> Error @152, line 10, Could not write to COM device. (1)

TD(3g): Failed to set the PIN code.

antclan 发表于 2011-7-13 09:10

建议刷官方版本试试

psfan 发表于 2011-7-28 08:57

自动拨号有点小问题，MU350插上后能马上识别出ttyUSB0，但此时无法拨号，必须等几分钟直到ttyUSB4等其它几个设备都识别出来才能拨号，这样的话自动拨号脚本就会误拨而错过最佳拨号时机，还是自己写个脚本放到cron定时轮询吧。

wainh 发表于 2011-7-29 02:43

楼主好强啊，谢谢了

孔布份紫 发表于 2011-7-29 07:26

再来看看强帖

jujuisle 发表于 2011-7-29 11:46

顶了，不错，学习了~

142234 发表于 2011-7-30 08:57

马克一下技术贴

zz243 发表于 2011-8-26 14:10

http://downloads.openwrt.org/snapshots/trunk/brcm63xx/packages/comgt_0.32-9_brcm63xx.ipk
请更新帖子中comgt版本及地址原0.32－8地址已经失效最新版本为0.32－9

jtefeng 发表于 2011-9-21 18:34

这个文章好。。。

asus2016 发表于 2011-10-4 14:17

很好，顶了

页: 1 2 3 4 5 6 7 8 9 10 [11]

专门网's Archiver