【原创】关于高通多模卡42T0961的网络切换管理软件（非Verizon Access Manager）

dalefirst

我的3G安装情况，见这个帖子：

http://www.ibmnb.com/thread-886175-1-1.html

对于42T0961的多模卡，通过EVDO写号和WCDMA插卡上网，原来平时用Verizon Access Manager进行网络制式选择，可以把卡的模式从GSM/WCDMA切换到CDMA，也可以从CDMA切换到GSM/WCDMA模式，一直运行正常。

这两天我装了个Windows 7 X64双系统，在Windows7下面用Verizon Access Manager测试卡从GSM-CDMA切换时出现蓝屏，重启后无论在Win7还是XP下面，CDMA切换到GSM正常，GSM切换到CDMA却每次都会蓝屏，重装了N次的Verizon Access Manager、多模卡的老版、新版驱动、AC后，切换到CDMA/EVDO时还是准时蓝屏，无语，找不到原因了，又不想重装系统。

而用AC做切换却可以，但AC不方便，每次从GSM/WCDMA切换到CDMA/EVDO以后所有的高通设备（包括modem和port）都消失了，只剩下一个QDLoader的端口设备，必须重启，重启后卡工作在CDMA/EVDO模式，非常不方便！

这几天发现有一个原来论坛jinyuandong30兄弟推荐的Motion Connnection Manager软件，出新版了，新版本支持Verizon的CDMA制式了，现在用这个软件来做双模卡的网络制式切换，简单、稳定、高效，不会蓝屏，同时还有GPS和短信管理功能。大力推荐有多模卡的兄弟尝试一下这个软件。

最新版下载：

http://www.motioncomputing.com/d ... onCMSetup_V2301.zip

What's New In This Release

·       The MotionCM application is now represented by an icon in the system tray. Clicking on this icon will display a context menu for selecting commands.  Hovering the mouse cursor over this icon will display information about the device, the connection and the GPS status.  The system tray icon itself is an animated icon that represents the signal strength (RSSI) of the active WWAN signal.

·       Clicking the Close Button (the "X" in the upper-right corner) will hide the application except for the system tray icon.  To completely close the application, select "Exit" from the system tray menu.

·       MotionCM now supports receiving SMS messages when the profile is any UMTS/GSM profile (at this time SMS is not supported on CDMA profiles).  A button has been added to the Connect page that will display the SMS dialog, which will show any stored or received messages.

·       Several option check boxes have been added to the MotionCM user interface to control application behavior.  These include:

1.    Connect on program start

2.    Reconnect after Resume

3.    Minimize after connect

4.    Minimize when program starts

5.    Start GPS on program start

6.    Restart GPS after resume from Sleep or Hibernate

7.    Minimize after GPS start

These settings are stored in the registry on a per-user basis and are recalled whenever the application is started.

·       The currently-active profile is now displayed on the Connect page.

·       The graphic on the Connect tab button has been changed to be more consistent with the graphic used in Dashboard.

·       Support added for CDMA carriers.

·       Support added for automatic activation of CDMA carrier profiles (currently only Verizon).

[ Edited by  dalefirst on 2009-11-7 11:39 ]