【原创】Complete guide for solving 2010 error on T43 with Hitachi HD(Revised)

lllppp

Note for 5K100 100G users: The FW.PRO file doesn't contain a seprate part for 5K100 100G harddisk and  the firmware version of 5K100 100G is  started with "MBZO". There is no way to do a firmware update for 5K100 100G at this moment, do not waste your time.

Warrning: Updating failure may cause unrecoverble damage to your harddisk and it may not work! This guide is for power users, English version available only.

There will not be a Chinese version, any question will not be answered.

Part A: Guide for updating retail harddisks except Hitachi 5K100/7K100 series

Step 1. Download the iso image from the following link
http://www-307.ibm.com/pc/suppor ... ;lndocid=MIGR-62282

Step 2. Burn the image file into a CD-R or CD-RW disc

Step 3. Check the FW.PRO file in the disc, take a 60GB harddisk of 5K80 series for example here:

;   Hitachi :  HTS5480xxM9AT00
;
; HTS548060M9AT00 60.0GB
"HTS548060M9AT00","MGBOA50A","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
"HTS548060M9AT00","MGBOA55A","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
"HTS548060M9AT00","MGBOA5BA","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
"HTS548060M9AT00","MGBOA5DA","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"

We can see that the phrases include 4 parts of information for automated flashing work:

MGBIA5HA.bin: New firmware file
hfui12L.exe: Flash program for specified harddisk
IA5HA: Version control phrase
MRLA5HA.tbl: CHECKSUM file

Find the phrases whitch matchs your harddisk and write down the 4 parts for following work.

Step 4. Boot with the disc, press "F5" key after seeing the boot messege to skip the autoexec program

Step 5. Type in the command in the following format:

[Flash program] [Version control phrase, first char. change to O] [New firmware file] /F [CHECKSUM file]

Take a 60GB harddisk of 5K80 series for example, the command should be:

hfui12L.exe OA5HA MGBIA5HA.bin /F MRLA5HA.tbl

Excute the command and press "U" in the program, you will see the failure information. That's doesn't matter, let's exit the program and continue to the next step.

Step 6. Type in the command in the following format:

[Flash program] [Version control phrase] [New firmware file] /F [CHECKSUM file]

Take a 60GB harddisk of 5K80 series for example, the command should be:

hfui12L.exe IA5HA MGBIA5HA.bin /F MRLA5HA.tbl

Excute the command and press "U" in the program, you will see the PASS information.

Congratulations! Your harddisk has been updated to IBM official firmware and no more "2010 error" message wil be displayed.


Part B: Guide for updating retail Hitachi 5K100s and 7K100s

Step 1. Download the 1.44M floppy image.  You can find it at the end of the post, or from the rapidshare link below.

http://rapidshare.de/files/13761480/5K7K100_Revised.rar.html

Step 2. Make a bootable disc/floppy disk/flash stick with the img file. It's also ok for the soft boot solution (vfloppy or some others).

Step 3. Use some software to extract the FW.PRO file from the image file. Check the FW.PRO file, take a 80GB harddisk of 5K100 series for example here:

;   Hitachi :  HTS5410xxG9AT00
;
; HTS541080G9AT00 80.0GB
"HTS541080G9AT00","MB4IA5BJ","MB4IA60A","MB4IA60A.bdr","hfui14.exe","IA60A","/u mpbA60Ab.tbl"
"HTS541080G9AT00","MBYIA5BJ","MBYIA60A","MBYIA60A.bdr","hfui14.exe","IA60A","/u mpbA60Ab.tbl"


We can see that the phrases include 4 parts of information for automated flashing work:

MBYIA60A.bdr: New firmware file
hfui14.exe: Flash program for specified harddisk
IA60A: Version control phrase
mpbA60Ab.tbl: CHECKSUM file

Find the phrases whitch matchs your harddisk and write down the 4 parts for following work.

Step 4. Boot with the disk

Step 5. Type in the command in the following format:

[Flash program] [Version control phrase, first char. change to O] [New firmware file] /F [CHECKSUM file]

Take a 80GB harddisk of 5K100 series for example, the command should be:

hfui14.exe OA60A MBYIA60A.bdr /F mpbA60Ab.tbl

Excute the command and press "U" in the program, you will see the failure information. That's doesn't matter, let's exit the program and continue to the next step.

Step 6. Type in the command in the following format:

[Flash program] [Version control phrase] [New firmware file] /F [CHECKSUM file]

Take a 80GB harddisk of 5K100 series for example, the command should be:

hfui14.exe IA60A MBYIA60A.bdr /F mpbA60Ab.tbl

Excute the command and press "U" in the program, you will see the PASS information.

Congratulations! Your harddisk has been updated to IBM official firmware  and no more "2010 error" message wil be displayed.

[ 本帖最后由 lllppp 于 2006-3-9 23:47 编辑 ]

quinezhu

收藏，谢谢

Choi

为什么写英文？就因为for power users？

88079955

中文的为什么不见了？
经确认，我在16日晚提的问题是存在的，100G 7k100刷新后，不支持48 bit LBA，而没有刷新的则支持。
这个问题还请楼主严重关注。
多谢了。

Liao_Duan

哎，开始看英文吧，累呀。

Liao_Duan

看懂了，还要去找vflopy,郁闷阿郁闷

麦克罗夫

请问， Hitachi 7K100 零售版的刷完firmware还会不会有error2010出现啊？

麦克罗夫

和IBM订7K100要RMB2700诶， 抢啊！以零售价格都可以买两颗，一颗拿来垫桌角都爽。。。

Liao_Duan

哎，谁能提供vflopy的教程啊，没有软驱怎么办呢

Liao_Duan

晕，附件下载下来出错，没法解压。

Liao_Duan

人呢?顶起来!

zhaobin714

怎么变鸟语了~~~

[ 本帖最后由 zhaobin714 于 2006-2-22 14:04 编辑 ]

zhaobin714

正在找呢！那位英语好的翻成中文，万分感谢

makedoit

不行，5k100升级不了。而且虚拟软驱里的升级软件是15版的，不是14的，不知道和这个有关系没有。

makedoit

我自己换成了14的，还是不能升级。

kimble

楼主能不能给一个这个文章的英文链接呢？谢谢！

lllppp

QUOTE:

原帖由 kimble 于 2006-3-5 13:32 发表
楼主能不能给一个这个文章的英文链接呢？谢谢！

我自己写的，外面有po出来还是我写的，有什么分别？

sonnycool

最后附带的文件无法解压。。

nbfun

用此方法无法升级5k100的80G硬盘！！如有升级成功的请报名。

sj0121

看来咱Ｅ文有待提高．．．

sonnycool

楼主文件有问题下载下面的文件吧

      --〉part1
      -->part2

kkndgts

收藏了，等以后有T43的时候用

秋风

不错。试试看。

lllppp

img file revised

fasthorse

7k100是否可以升级呢？有使用过的兄弟么？

Drifter

还是不明白, 为什么这个帖子要写成E文.

wjsong

19楼XD :你的5K100 80G硬盘的问题,可以请教台湾的麦克罗夫,他是这方面的专家.

peanutszhang

楼主，不行的，5k100 80gb的硬盘不能升级，提示“unmatched firmware”。 楼主有别的办法么？多谢！

T43-CH7

是你转贴别人，还是别人转贴你的？
http://forum.thinkpads.com/viewtopic.php?t=20858

seraphiw

楼主可以打中文，
为何还要用E文？难道。。

与楼上有相同疑问。