|
|
发表于 2022-11-4 23:52:44| 字数 4,764| - 新疆 移动/数据上网公共出口
|
显示全部楼层
本帖最后由 tlzsw 于 2022-11-4 23:55 编辑
BIOS设置管理的命令行工具~官网上有详细介绍~
WHAT THIS PACKAGE DOES
ThinkPad stores various UEFI BIOS settings in its nonvolatile memory like
Flash or EEPROM. These settings are configured by using the ThinkPad Setup
menu. In general, this is done manually by the user. However, from a
deployment point of view, the ThinkPad Setup settings are expected to be
common to all machines and to be controlled remotely.
This software is a Windows application for this purpose.
Features:
- Copy UEFI BIOS setup data settings
- Copy UEFI BIOS secure data settings
- Install and update for power-on password
- Install for hard disk password
- Install System Management Password
- Copy supervisor password.
This program is language independent and can be used with any language system.
--------------------------------------------------------------------------------
HOW TO USE THE SOFTWARE
Note:
- If your computer runs satisfactorily now, it may not be necessary to update
the software. To determine if you should update the software, refer to the
Version Information section.
- You do not have to install the software. You need to copy SRSETUPWIN64.exe
and SRSWDRV64.SYS to the same directory.
---------------------------------
Capturing ThinkPad Setup Settings
Do the following procedures at a donor ThinkPad:
(Setting up a donor ThinkPad)
1. Turn off the computer.
2. Turn on the computer.
3. While the following messages is displayed at the lower-left area of the
screen, press the F1 key.
To interrupt normal startup, press Enter
The ThinkPad Setup menu will be displayed. If a password prompt appears,
type the correct password.
4. Change and save the desired settings as required. It is recommneded that
the supervisor password is set at this time. This supervior password is
copied to a target ThinkPad.
5. Exit from the ThinkPad Setup and restart the computer.
6. Ensure that the donor ThinkPad starts up and functions properly.
(Starting capture)
7. Boot Windows.
8. Prepare SRSETUPWIN64.EXE and SRSWDRV64.SYS
to the same directory.
9. Open Command Prompt as "Run as Administrator"
10. At the command line, execute SRSETUPWIN.EXE with the /c option.
Example: SRSETUPWIN.EXE \path\file_name /c
Where \path\file_name is the path and file name of ThinkPad Setup Settings
file to be created.
(Capture options)
[Secure data and Supervisor password]
SRSETUPWIN can capture UEFI BIOS secure data that includes a supervisor
password. The captured data has an encrypted supervisor password of the
donor ThinkPad. To capture the supervisor password, add the /kpap option to
enter the password by the keyboard.
Example: SRSETUPWIN.EXE \path\file_name /c /kpap
[Power-on password and Hard disk password]
SRSETUPWIN can deploy power-on password and hard disk password. To set the
power-on password and hard disk password at the target ThinkPad computers,
create a password.txt file (any name), add the /EP password.txt options.
Example: SRSETUPWIN.EXE \path\file_name /c /EP password.txt
Where password.txt contains the names of UEFI BIOS settings files for each
of target ThinkPad computers, the power-on password and the hard disk
password. "Sample.txt" shows the format of .csv file.
If the supervisor password is set on a donor ThinkPad, add the /kpap option
to enter the password by the keyboard.
Example: SRSETUPWIN.EXE \path\file_name /c /kpap /EP password.txt
In this case, the ThinkPad Setup Settings file contains a supervisor
password.
[New Password File Format]
SRSETUPWIN also support new password file format.
- Change passwird text format from single line cvs to multiple line.
- Add System Managemant Password support.
This new password format file is appied with /EP2 option.
Example: SRSETUPWIN.EXE \path\file_name /c /kpap /EP2 new_password_file.txt
WARNING:
This process creates an intermediate file that contains the power-on
password, hard disk password and a pointer to the system that these
passwords are intended to be installed on. Be sure to treat this
intermediate file as a potential security exposure that exists until the
reset process is complete. Be sure to transmit the file securely to the
target system and to destroy the file when finished. Examples of secure
transmission include carrying the file on removable media to the target
system or encrypting the file before transmission over the network to the
target system.
------------------------------------
Playing Back ThinkPad Setup Settings
Do the following procedures at a target ThinkPad:
(Starting playback)
1. Set supervisor password to a target ThinkPad.
2. Boot Windows.
3. Prepare SRSETUPWIN64.EXE and SRSWDRV64.SYS
to the same directory.
4. Copy the ThinkPad Setup Settings file in the step 10 of the "Capturing
ThinkPad Setup Settings".
5. Open Command Prompt as "Run as Administrator"
6. At the command line, execute SRSETUPWIN.EXE with the /u option.
Example: SRSETUPWIN.EXE \path\file_name /u /kpap
Where \path\file_name is the path and file name of ThinkPad Setup Settings
file. And type the superviosr password setting in Step1.
4. Restart, the computer.
(Notes)
A target ThinkPad must have superviosr password beforehand.
[Power-on password and Hard disk password]
If the target computer already has a power-on password and/or a hard disk
password, you can not set the passwords by SRSETUPWIN. You must remove the
passwords by ThinkPad Setup Utility at the target computer.
https://download.lenovo.com/pccbbs/mobiles/n3ats04w.txt |
|
狗仔卡
离线
提升卡
置顶卡
变色卡
