|
发表于 2007-8-22 17:25:57| 字数 3,359| - 中国–江苏–南京–秦淮区 电信
|
显示全部楼层
|阅读模式
Exam CISCO-642-354 Demo
1.Drag the TCP/IP configuration command on the left to the appropriate result on the right.
70-219 70-228 70-291 70-310 70-330 70-340 70-443 70-551 70-553
Drag and drop question. Drag the items to the proper locations.
Correct Answers:
2.Drag Drop question
Drag and drop question. Drag the items to the proper locations.
Correct Answers:642-071 642-321 642-591 642-691 642-871 70-123 70-217
3.Which of these Cisco Fabric Manager debugging tools can compare the current configuration with a previously saved configuration file?
A: Switch Health Analysis
B: Fabric Configuration Analysis
C: End-to-End Connectivity Analysis
D: Zone Merge Analysis
Correct Answers: B
4.Fabric merge failures are typically caused by which three configuration errors? (Choose three.) MB3-215 MB4-211 MB6-282 350-026 646-228 HP0-698
A:unique domain IDs
B:VSAN missing from one switch
C:incompatibility in the active zone databases
D:connecting ports incorrectly configured as TE
E:incorrect VSAN allow list on ISL
F:preferred domain IDs
Correct Answers: B, C, E
5.You have been asked to convert three existing ISLs into a PortChannel as nondisruptively as possible. Which approach will best accomplish this?642-845 642-825 646-391 70-620 HP0-683 350-030
A: Place all three ISLs into a PortChannel, because PortChannel creation is a nondisruptive operation.
B: Convert the ISLs into an EISL and then place them into a PortChannel.
C: Place one link into a single-link PortChannel and then add the other two links to the PortChannel.
D: Ensure that the VSAN allowed lists on both ends of each link are identically configured, then create the three-link PortChannel.
Correct Answers: C
6.Your company has a multiswitch fabric including Switch A and Switch B. An administrator of Switch A creates the following zoneset and successfully activates it: MB4-117 646-392 000-217 646-171 000-568 000-770
zoneset name ZoneSet1 vsan 1
zone name Zone1 vsan 1
pwwn 21:01:00:e0:8b:3c:03:b6
pwwn 21:01:00:e0:8b:3c:55:bb
Later in the day a second administrator creates the following zone set on Switch B:
zoneset name ZoneSet2 vsan 1
zone name Zone1 vsan 1
pwwn 21:01:00:e0:8b:3c:03:b6
pwwn 21:01:00:e0:8b:3c:55:aa
What happens when the administrator of Switch B attempts to activate ZoneSet2?
A: ZoneSet2 becomes the active zoneset for both Switches A and B.
B: The fabric segments and ZoneSet2 become the active zoneset for Switch B only.
C: The fabric segments and ZoneSet 2 become the active zoneset for Switch A only.
D: The fabric segments and ZoneSet 1 remain the active zone set for Switch B, while ZoneSet 2 becomes the active zoneset for Switch A.
Correct Answers: A
7.Reference the exhibit.
Given the output from the show command in the exhibit, what does the error message indicate is wrong with the configuration?920-241 HP0-728 MBS Certification CCDA Certification SCJP Certification
A: Trunk mode has been administratively set to E instead of TE.
B: The port needs a shut/noshut to become active.
C: The port has been incorrectly left in VSAN 1.
D: The trunk needs configured VSANs allowed on both sides.
Correct Answers: D
8.Your Cisco MDS director has 224 Fibre Channel ports and two power supplies running with 110 VAC. Which of the following may occur if one power supply fails?
A: The switch shuts down immediately.
B: Insufficient power is available to operate all modules, so some will be shut down.
C: The standby supervisor shuts down.
D: The switch shuts down after a five-minute grace period.
Correct Answers: B
9.Which three CLI commands can be used to view remaining buffer-to-buffer credits? (Choose three.)
A:show interface fc x/y
B:show interface fc x/y brief
C:show interface fc x/y counters
D:show interface fc x/y bbcredit
E:show interface fc x/y flow-control
Correct Answers: A, C, D
10.Which troubleshooting tool uses RDL and helps isolate problem points across trunking-enabled EISL and ISL ports?
A: SPAN
B: FC Ping
C: traceroute
D: RMON
Correct Answers: B |
|