硬件设备错误代码

黄振宇

Error Code Description
Code 1 This device is not configured correctly.
Code 2 Windows cannot load the driver for this device.
Code 3 The driver for this device might be corrupted, or your system may be running low on memory or other resources.
Code 4 This device is not working properly. One of its drivers or your registry might be corrupted.
Code 5 The driver for this device needs a resource that Windows cannot manage.
Code 6 The boot configuration for this device conflicts with other devices. Cannot filter.
Code 7 Cannot filter.
Code 8 The driver loader for the device is missing.
Code 9 This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.
Code 10 This device cannot start.
Code 11 This device failed.
Code 12 This device cannot find enough free resources that it can use.
Code 13 Windows cannot verify this device's resources.
Code 14 This device cannot work properly until you restart your computer.
Code 15 This device is not working properly because there is probably a renumeration problem.
Code 16 Windows cannot identify all the resources this device uses.
Code 17 This device is asking for an unknown resource type.
Code 18 Reinstall the drivers for this device.
Code 19 Your registry might be corrupted.
Code 21 Windows is removing this device.
Code 22 This device is disabled.
Code 24 This device is not present, is not working properly, or does not have all its drivers installed.
Code 25 Windows is still setting up this device. (Same text as Code 26.)
Code 26 Windows is still setting up this device. (Same text as Code 25.)
Code 27 This device does not have valid log configuration.
Code 28 The drivers for this device are not installed.
Code 29 This device is disabled because the firmware of the device did not give it the required resources.
Code 31 This device is not working properly because Windows cannot load the drivers required for this device.
Code 32 A driver for this device was not required and has been disabled.
Code 33 Windows cannot determine which resources are required for this device.
Code 34 Windows cannot determine the settings for this device.
Code 35 Your computer's system firmware does not include enough information to properly configure and use this device.  
Code 36 This device is requesting a PCI interrupt but is configured for an ISA interrupt (or vice versa).

黄振宇

错误代码 说明
1  设备被错误的配置
2  Windows不能加载此设备的驱动
3  设备驱动被破坏，或者系统资源（内存等）不足
4  设备不能正常工作，驱动或注册表被破坏
5  Windows不能管理设备驱动所需的资源
6  设备的启动配置和其他设备冲突
7  无法清除
8  设备驱动丢失
9  设备无法正常工作，因为控制固件报告驱动资源错误
10 设备无法启动
11 设备失效
12 设备找不到足够的空闲资源
13 Windows无法验证设备的资源
14 设备在重启以前不能正常工作
15 设备无法正常工作，因为可能出现再数错误
16 Windows无法识别驱动使用的资源
17 设备正在发送未知资源类型的请求
18 重装设备驱动
19 注册表可能损坏
21 Windows正在移除此设备
22 设备被禁用
24 设备当前不可用，不能正常工作，或是驱动没有被完全安装
25 Windows正在安装此设备（同26）
26 Windows正在安装此设备（同25）
27 设备没有有效的日志设置
28 设备驱动还未安装
29 设备被禁用，因为设备的固件无法提供有效资源
31 设备无法正常工作，因为Windows不能加载所需驱动
32 设备的某一驱动多余，已经被禁用
33 Windows无法确定设备所需资源
34 Windows无法确定设备设置
35 你的计算机系统固件不包含足够的设备配置和使用信息
36 设备正在请求PCI中断，然而被配置成ISA中断（或vice versa）

黄振宇

翻译的很匆忙，质量有限，请见谅

c@ini@o

不错！
支持！

bobo9805

东西我都记下了.好强啊!!!不愧是我们华中区的帮主,哈哈